valves, taps and cocks - South Africa: tenders. rfq, rfp. Public and goverment procurement information and competitive bids. 2025

26 mar

Quotations are hereby requested for the Renovation of municipal house no 105 Dirkiie Street. Scope: 1. Service and repair of the following appliances: - Air conditioner main lounge (18000 B.T.U); - Air conditioner main bedroom (12000 B.T.U); - Stove plates; - 6 door handles; - Kitchen blinds; - Painting the whole house; - Light for the whole house; - Fixing all kitchen cupboards; - Fixing all bedroom wardrobes; - Water taps in the washing area, 2 bathroom and the kitchen; - Handles for windows (in the lounge); - Fixing or painting tiles (small bathroom); - Fixing leakages (whole house). (EN)

Deadline: 4 days
Customer: ONLINE TENDERS

Number: 121094650

Country: South Africa

Source: ONLINE TENDERS

26 mar

Tenders are hereby invited for the renovations at Umtata Haematology Lab in Umtata, Sisson Street, Fort Gale. Specifications: - Remove existing aluminium partition and re-fit to new position, - Supply and fit solid aluminium partition 1200mm high to match existing, - Supply and fit aluminium frame with 6mm safety laminated glass above aluminium partition up to ceiling height 2800mm to match existing, - Remove existing sink, taps and table and re-fit to new position, reconnect to nearest water supply and drainage, - Close off existing water supply and drainage and make safe, - Remove existing glass door and re-fit to new position, - Supply and fit 15 amp Crabtree double plug point for fridges, wire from nearest plug point, surface mounted, allow for wiring and ducting, - Supply and install 1200mm x 600mm x 11mm high slim panel Ecomax 50 watt recessed light fittings, fit 20 pvc conduit and fit 5 amp plug point to each light fitting, allow for bends, saddles and round pvc boxes and plug tops, - Remove all rubble from site. (EN)

Deadline: 14 days
Customer: ONLINE TENDERS

Number: 121097767

Country: South Africa

Source: ONLINE TENDERS

20 mar

Tenders are hereby invited for renovations & repairs of Sammy Marks Museum: • Wooden floor requires sanding and varnishing, • Repair/replace existing kitchen cupboards, • Replace existing wooden tops with granite tops, • Bathroom - delivery and installation of floor tiles, • Plumbing - installation of pipes, taps, and geyser (100 litres), • Diagnose, repair/replace all kitchen plugs, • Painting with approved interior paint - walls and ceiling, • Delivery and supply of gas supply pipe from gas cage mounted on the wall into the kitchen (issue gas certificate), • Supply, delivery, and connecting gas stove with an electric oven and ensure it functions, • Housekeeping (removing rubble/debris from the museum), • Supply, delivery, repairs, renovations - Willem Prinsloo Agic Museum, • Roof repairs, waterproofing, replace worn-out iron sheets, • Waterproof water leaks around the chimney, • Delivery, supply, and installation of ceiling boards and painting, • Conceal geyser with wooden open/close door, • Conceal wedge/crack wall corner, • Repair, replace window hinges, • Repair existing kitchen cupboards, • Diagnose, supply, delivery of components, repair, replace heater/fan in the dining halls, • Housekeeping (remove all rubble from the museum). (EN)

Deadline: 8 days
Customer: ONLINE TENDERS

Number: 120794022

Country: South Africa

Source: ONLINE TENDERS

20 mar

Quotations are hereby requested for refurbishment of Municipal Buildings on erven 1269. Specifications: Refurbishment of municipal buildings including the following: - Repair and painting of ceiling, - Installation of water taps, shower heads, toilet seats and hand wash basins, - Repair and maintenance of plumbing and geyser, - Paint Internal Walls, - Glazing, - Installation of floor tiles, - Maintenance of doors and installation lock systems along with handles. Contract Period: Once-Off. (EN)

Deadline: 1 days
Customer: ONLINE TENDERS

Number: 120794023

Country: South Africa

Source: ONLINE TENDERS

20 mar

Quotations are hereby invited from service providers for the supply and installation of additional Water Storage Tanks. General Scope of Works: • Supply and install 2 x 20kl JoJo Tanks including all required piping, isolation valves and float valves needed to link the tanks to the existing water storage system, • All pipes (75mm) and valves to be PVC must match existing, • Tanks to match existing tanks on site (green in colour) and needs to be SABS approved, • Breather vents on the tanks need to have a mesh screen to prevent debris and mosquitoes from entering the tank, • Clear and remove off site all foliage where the tanks are to be positioned, • Cast a concrete base/plinth to match the existing (+/- 3mx6mx250mm, 30mpa, with steel reinforcing mesh). (EN)

Deadline: 1 days
Customer: ONLINE TENDERS

Number: 120797548

Country: South Africa

Source: ONLINE TENDERS

20 mar

Quotations are hereby invited for the Supply and Delivery of Inventory Items for Civil Department. Specifications: - Toilet Seats, N.I.P SABS APP, Hardened PLA x 30 units; - Cocks, Bib, Brass, C/W Hose Conn, 15mm Cobra x 100 units; - Cocks, Bib, Brass, C/W Hose Conn, 20mm Cobra x 100 units; - Mixer, Tap for Basin, 15mm x 100 units; - Bolts Rawl 6 x 55 mm x 100 units; - Bolts Rawl 8 x 50 mm x 100 units; - Bolts & Nuts, Hex, Black 8 x 25 mm x 200 units; - Bolts & Nuts, Hex, Black 12 x 55 mm x 200 units; - Hinges Butt, Steel, 75 mm x 30 units; - Nipples, Barrel, Galv 32 mm x 100 units; - Sockets, Galv, 10 mm x 100 units; - Bushes, Reducing, Black, 15 mm x 8 mm x 100 units; - Bushes, Reducing, Black, 20 mm x 15 mm x 100 units; - Bushes, Reducing, Galv, 15 mm x 8 mm x 100 units; - Bushes, Reducing, Galv, 25 mm x 20 mm x 100 units; - Bushes, Reducing, Black, 50 mm x 40 mm x 100 units; - Sockets, Reducing, Galv 1 1/2" - 1 1/4" x 100 units; - Elbows, Galv, F & F 90 Deg 50 mm x 10 units; - Bends, Galv, 80 mm x 90 Deg x 10 units; - Nipples, Barrel, Galv 25 mm x 100 units; - Plugs, Galv, 10 mm x 100 units; - Files, Round, 2nd Cut 250 mm x 10 units; - Sockets, Black, 40 mm x 100 units; - Sockets, Galv, 32 mm x 100 units; - Nipples, Barrel, Galv, 20 mm x 100 units; - Cistern Comp. Beta Bottom Inlet (FP 15F) x 30 units; - Wall Plate, Tee Cobra Fem Iron/Cop/Cop 15 x 20 units; - Valves, Cobra Closely 400 KPA x 50 units; - Hammer Head 4 lb (91.8 kg) x 10 units; - HSS Drill Bit, Straight, Shank – 4mm x 20 units; - Nails, Ramset Easy Drive ED 655 100/Box x 20 boxes; - Elbow, Galv, 90 Deg, 32 mm x 10 units; - Tee, Equal Conex Cobra, 611M B/BRS 22mm x 100 units; - Sockets, Reducing Galv 1 1/2" - 1 1/4" x 100 units; - Valve, Gate, Fullway CxC, 22mm x 10 units; - Handles, Hammer, 14 lb, 900 mm x 10 units; - Elbow, Galv, Female, 40 mm x 50 units; - Elbows, Galv, 10 mm - 100 units; - Bushes, Reducing, Galv, 15 mm x 10 mm x 100 units. Please confirm the closing time as two were published. (EN)

Customer: ONLINE TENDERS

Number: 120800901

Country: South Africa

Source: ONLINE TENDERS

18 mar

Toyota 5L Engine Valves (EN)

Deadline: 71 days
Customer: Made-in-china

Number: 120665191

Country: South Africa

Source: Made-in-china

12 mar

Quotations are hereby invited to supply and deliver gate valves and accessories at Laing Dam Construction Unit Office. Specifications: - DN 300mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 350 mm flanged gate valve, T25 1RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 250mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 200mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 150mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 100mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 80mm flanged gate valve, T16 RHC Capped Top RSV NRS Gate Valve T16 Gate Valve x 1; - DN 150mm Socketed T16 RHC Capped Top RSV NRS Gate Valve x 1; - DN 100mm Socketed T16 RHC Capped Top RSV NRS Gate Valve x 1; - DN 80mm Socketed T16 RHC Capped Top RSV NRS Gate Valve x 1; - 100mm T16 Air Valves x 1; - 300mm T16 Full Face Klinger gaskets x 1; - 250mm T16 Full Face Klinger gaskets x 1; - 200mm T16 Full Face Klinger gaskets x 1; - 150mm T16 Full Face Klinger gaskets x 1; - 100mm T16 Full Face Klinger gaskets x 1; - 80mm T16 Full Face Klinger gaskets x 1; - M16 x 75mm HDG Bolts, Nuts,& Washers x 1; - M24 x 75mm HDG Bolts, Nuts, & Washers x 1; - Box of 100mm Denzo Tape (27 units in box) x 1. (EN)

Customer: ONLINE TENDERS

Number: 120340234

Country: South Africa

Source: ONLINE TENDERS

11 mar

Quotations are hereby invited for the supply and delivery of materials for Withoogte. Specifications: - 50mm Class 16 UPVC Pipe – 6m Socketed, Qty: 2010m, - 40mm Class 16 UPVC Pipe – 6m Socketed, Qty: 1020m, - 20mm Class 16 HDPE Pipe, Qty: 100m, - 25mm Air valves, Qty: 10, - 63mm x 20mm Saddles, Qty: 6, - 50mm x 20mm Saddles, Qty: 6, - 40mm x 20mm Saddle, Qty: 6, - 63mm Ball valve, F x F, Qty: 3, - 50mm Ball valve, F x F, Qty: 3, - 40mm Ball valve, F x F, Qty: 3, - 63mm x 3” PVC Male Adaptor, Qty: 6, - 50mm x 2” PVC Male Adaptor, Qty: 6, - 40mm x 1 ½ “ PVC Male Adaptor, Qty: 6, - 20mm Ball valves, M x F, Qty: 10, - 20mm x ¾ “, M x F Adaptor, Qty: 20. (EN)

Customer: ONLINE TENDERS

Number: 120276119

Country: South Africa

Source: ONLINE TENDERS

06 mar

Quotations are hereby invited to repair 2 Bermad valves and supply 2 lim. Scope of work: 1) Replace two (2) Bermad valves (Booster pump control valves) DN150, PN16, 2) Two Limit switches. Place of delivery: Christiana. Please note this quotation was published late. (EN)

Customer: ONLINE TENDERS

Number: 119995549

Country: South Africa

Source: ONLINE TENDERS

06 mar

Quotations are hereby invited for the Supply of Safety related equipment: 3 each x mass decontamination system. Specifications: Mass decontamination shower unit that allows for rapid response in a hazardous material decontamination scenario. To include the complete inflatable shower structure system with removable internal partitioning and raised floor, that provides for splash containment and personal privacy. To limit weight and promote transport and compact storage, the unit must not include a mechanical framework. Features to include: Compact and easily transportable; Lightweight and quick set-up to facilitate rapid operational readiness and to remain standing without continuous inflation; Unit must be suitable for use on hard or soft standing with minimum four affixed guy ropes provided, for securing in position during inclement weather; Entrance and exit zippered roll-up doors with a separate curtain fitted to promote privacy; Flexible internal partitioning with pre and post decontamination changing areas; Internal layout to be partitioned into three lanes for male, female & assisted casualties, with pre and post decon changing areas; Partitions must be removable and doors able to be linked together allowing the shower to be configured as a single, double or triple lane system; To be fitted with windows on internal shower doors with covers and the assisted (central) lane door must include a zipped flap for transferring medical equipment; To include raised floor panels in shower that prevent contact with contaminated shower wash-off; Wash off must be collected in a chemically resistant sump; Integral detachable groundsheet; Sleeves for portable air heaters and pumped extraction of contaminated water to be incorporated into the design. Sleeves must be included; Shower nozzles must all be of demand type and can be turned on/off individually; Output flow of shower heads must be no more than 20 litres per minute each; Shower system to have two separate water feeds allowing introduction of water treated with a cleanser or neutralising agent; Four internal and four external shut-off taps to be fitted for individual control of front and rear, left and right-hand side water supply; Fitted with at least two internal spring loaded inflation/deflation ports that allow the use of ARS (automatic refilling system) inflators for extended deployments. Ports fitted with dust/water cap and the filling hose and connection to be included; Working pressure approximately 0.5 bar; Unit to be manufactured of PU material of minimum 900g/m²; Lightweight and easily portable in PVC cover/s fitted with handles and closures, to be included; Inflated height of unit not to exceed 2200mm; Unit weight not to exceed 100kg; Colour: predominant yellow upper with black or grey basin and ground sheet; System design allows for minimal training, servicing and maintenance costs. To be supplied with: Valise; Repair kit; Inflation hose - 1m (for use with 8 bar regulator); Accessories kit bag, containing galvanised ground fixing pegs, rubber mallet and hand pump, Non-slip self-draining matting, Electric inflator. Delivery Date: 2025/05/30. (EN)

Customer: ONLINE TENDERS

Number: 120059751

Country: South Africa

Source: ONLINE TENDERS

02 mar

Digital Display Double Taps China Beer Dispenser Kegerator Beer Cooler Keg (EN)

Number: 119818085

Country: South Africa

Source: RFQ

28 feb

Extension of closing and meeting date: Formal written quotations are hereby invited for the maintenance, service, commissioning and calibration of the iron removal plant and the supply, installation and delivery of all associated components at the treatment works. Specifications: - Service Reports on all maintenance work to be submitted after commission; - Develop a maintenance schedule for periodic maintenance of plant components (pumps, valves, media etc); - All servicing and replacing oxidation unit to be done; - Service of Venturi Pump 0.75kw CPM or replacement; - Full inspection on all systems to be noted in the Service report; - All additional items/requirements not listed in the normal service to be noted on the service report all report must submitted on request of the client. (EN)

Customer: ONLINE TENDERS

Number: 119723788

Country: South Africa

Source: ONLINE TENDERS

21 feb

Quotations are hereby invited to supply, install & commissioning complete piston compressors with vessels x 01/04 off. Specifications: - Ingersoll Rand - Model: 7100 (B60). Size 5.5 inches and 3 x 4 inches. EX Serial no: 9830040. Type 30 two-stage bare pump air compressor includes a two-stage 100% cast iron pump and the air filter canister. Flow: (1302 l/min). Working Pressure: 12 Bar. No Cylinders: 2 Cylinder. Stages: 2 Stage. Litres per minute: 1302 L/min or above. Minimum RPM: 750. Maximum RPM: 1500. Dimensions: 30L x 27W x 26H. Vessel Capacity: 500L (Should be supplied with vibration Dampener System to Reduce Vibration). Motor Voltage: 380V 3 phase. Drive Power: 11kW (15hp), belt driven with safety guards. The compressors should be compatible to Scada systems; - Auxiliaries (To be supplied with compressors) • Pressure switch with electrical contacts x 4; • Mechanical Pressure gauge x 4; • Pressure relieve valves x 4; • Copper pipes and fittings (for 4 compressors); • Motor (3phase 400V) 1500rev/min; • Vibration dampers/pads x 16; - Type 30 Air Compressor Blocks, Air power. Required documents upon delivery: Guarantee certificate: The contractor/service provider shall give a guarantee for a period of 12 months minimum after successful delivering the Compressors free from any defects in design. The contractor shall agree to replace at his/her cost any defective items discovered within the guaranteed period. Compressors should be accompanied by operating and maintenance manual. Please confirm the quantity required. (EN)

Customer: ONLINE TENDERS

Number: 119289129

Country: South Africa

Source: ONLINE TENDERS

11 feb

Bathroom Taps and Shower Units (EN)

Number: 118767832

Country: South Africa

Source: RFQ

10 feb

Re-Advertisement: Quotations are hereby invited for V0406 - overhaul engine and commission: Vin Number - ADMNP66LL5Z432508; Engine Number - ADMNP66LL5Z432508; Fleet Number - V0406; Year Model - 2008. Scope of Works: - Overhaul cylinder head; - Pressure test cylinder head; - Replace valves; - Replace valves guides; - Service injector pump and injectors; - Replace liner kit on block; - Re-sleeve kit with piston x 4; - Replace big end and main bearings; - Replace thrust wishers; - Cut crankshaft and polish; - Replace gasket set; - Replace oil pump and water pump (OEM); - Perform major service; - Clean radiator and flush; - Pressure test radiator; - Clean oil cooler, flush and test; - Replace clutch kit; - Skim flywheel; - Replace anti-theft unit on fuel tank; - Wash truck and commission; - Replace engine coolant. (EN)

Customer: ONLINE TENDERS

Number: 118719493

Country: South Africa

Source: ONLINE TENDERS

10 feb

Re-advertisement: Quotations are hereby requested for V0406 - Overhaul engine and commission, VIN Number = ADMNP66LL5Z432508, Engine Number = ADMNP66LL5Z432508, Fleet Number = V0406, Year Model = 2008. Scope of works: • Overhaul cylinder head; • Pressure test cylinder head; • Replace valves; • Replace valves guides; • Service injector pump and injectors; • Replace liner kit on block; • Re-sleeve kit with piston x 4; • Replace big end and main bearings; • Replace thrust wishers; • Cut crankshaft and polish; • Replace gasket set; • Replace oil pump and water pump (O.E.M); • Perform major service; • Clean radiator and flush; • Pressure test radiator; • Clean oil cooler, flush and test; • Replace clutch kit; • Skim flywheel; • Replace anti-theft unit on fuel tank; • Wash truck and commission; • Replace engine coolant. (EN)

Customer: ONLINE TENDERS

Number: 118719494

Country: South Africa

Source: ONLINE TENDERS

04 feb

Quotations are hereby invited for the repair and maintenance of the wastewater treatment plant in Loeriesfontein. Scope of Work: Inlet screen: • Not applicable; Electrical Supply System: • Check that all electrical cables & connections are intact and free of damage; • Check that Distribution Board/Control Panel Switches, Indicator Lights, Controls, Circuit Breakers, Contactors and overload protections are operational and test functionality where applicable; • Clean control panel and trunking and remove dust build up and any other materials Air Supply System; • Check all blowers for damage/wear or lubrication requirement; • Cleaning of Air Filter as required and replace quarterly; • Check all valves, relief valves, pressure gauges and piping for wear/damage and repair/replace as required; • Visually inspect bioreactor tanks to verify air supply to bioreactors; Re-Activated Sludge Return: • Check functioning of all valves; • Check if sludge return is functioning properly from all clarifier tanks; • Remove sludge return pumps visually inspect and check for any obstructions in the impellers; • Check sludge levels in all tanks and de-sludge if required; • Check dosing pump operation and settings and replace bacteria if required; Disinfection System: • Check operation of Ozone generators; • Measure air flow and maintain all pumps, Valves and components as per OEM Guideline; General/Process Operation: • Record whether the Plant been regularly maintained with respect to general cleanliness and preventative maintenance; • Are there any floating materials in any of the tanks; • What is the colour of the mixed liquor; • Is there a bad smell around the Sewage Treatment System; • Is there any floating sludge in the settler tanks; • Re-Train the relevant personnel during the service of the Plant; • Issue a report on the findings during the service on the Plant along with analysis results; Exclusions: • Any repairs on equipment; • Electrical component repairs; • Piping and Fittings repair. (EN)

Customer: ONLINE TENDERS

Number: 118405312

Country: South Africa

Source: ONLINE TENDERS

30 jan

Tenders are hereby invited for the Mandlakazi Regional Water Supply Phase 5, 5.5, Kombuzi Zone G1 reticulation network. The scope consists of approximately 68.1 km of reticulation pipelines diameters ranging between 20mm – 90mm (HDPE), 110mm – 200mm oPVC and yard taps, including air, scour, pressure-reducing, and isolating valves, meter chambers, and telemetry. (EN)

Customer: ONLINE TENDERS

Number: 118174037

Country: South Africa

Source: ONLINE TENDERS

30 jan

Tenders are hereby invited for the Mandlakazi Regional Water Supply Phase 5, 5.3, Esikhuthwaneni Zone C2 & C3 reticulation network. The scope consists of approximately 17.6 km of reticulation pipelines diameters ranging between 20mm - 90mm (HDPE) and yard taps, including air, scour, pressure reducing, and isolating valves, meter chambers, and telemetry. (EN)

Customer: ONLINE TENDERS

Number: 118174039

Country: South Africa

Source: ONLINE TENDERS

valves, taps and cocks: South Africa tenders, rfq bids, opportunities and procurement 2025