Painting work: South Africa tenders, rfq bids, opportunities and procurement 2025


Total: 89
27 nov
Tenders are hereby invited for the installation of new armoured windows and doors in the access control buildings in central grid substations for a period of twelve (12) months. Scope of work/Employers Requirements: The scope of work entails the full development of the project definition to enable the following high level tasks at the identified Central Grid HV plant substations. This includes, but is not limited to, the following activities: a) Drawings: • Ensure all necessary drawings as outlined are read and followed accordingly for the positions of identified openings, b) Removal and Replacement of Windows and External Doors: • Remove existing windows and external doors (main entrance, where applicable) as instructed, • Replace with new armoured windows and doors according to the manufacturer’s specifications, • Ensure the protection of the surrounding area from theft and adverse/inclined weather conditions during the removal and installation process, c) Finishing Work: • Make good the areas around windowsills and door architraves by backfilling the gaps with masonry mortar, • Plaster accordingly to achieve a desirable finish that matches the existing structure, d) Painting: • Apply primer and two coats of paint to match the existing paint colors, ensuring a consistent and professional appearance, e) Housekeeping: • Maintain cleanliness throughout the project by ensuring no residue or rubble is left behind after each installation activity. All debris should be properly disposed of, f) Window and Door Specifications: • Windows: • W1: 900mm x 900mm, • W2: 800mm (height) x 450mm (width), • W3:1020MM (height) x 1020mm (width), Exterior Doors: • Standard Door (D1): 2064mm (height) x 813mm (width), g) Detailed Work Breakdown: • Site Preparation. (EN) add to Favorites
Deadline: 19 days
Customer: ONLINE TENDERS

Number: 114884433

Country: South Africa

Source: ONLINE TENDERS

31 jul
Quotations are hereby invited for the following: Maintenance of road markings on airside and landside at OR Tambo International Airports for Airports Company of South Africa. Scope of work: In brief, the contractor shall be responsible for the maintenance of both airside and landside road markings at OR Tambo International Airport as and when required. The objective is to maintain the serviceability of the road markings in a sustainable manner at the lowest operating and maintenance cost while ensuring compliance to general safety and aviation related regulation. The nature of the contract is as follows: • The Service Managers expectation is for the contractor t always be available for emergency road marking works as and when needed. • Work will only take place when needed and upon instruction by the Service Manager. • It is expected that the contractor makes prior arrangements with material suppliers so that painting material is made available as and when needed, including during weekends and after hours. • It is a condition of this contract that the employer reserves the right to limit the total expenditure on the works. The scope of works may be reduced at any time before or during the contract period. The scope of works will include re painting of fading road markings on the runways, taxiways, taxi lanes, aprons, service roads as well as landside roads and open parking bays using retro reflective road marking paint. It will also include blacking out of incorrect markings that are no longer in use. The principal ACSA sites comprise of major international airports namely O.R. Tambo (ORTIA), Cape Town (CTIA) and King Shaka (KSIA). The other sites are Bram Fischer (Bram), Upington (UTN), Port Elizabeth (PLZ), East London Airport, George Airport, Kimberley Airport and the Corporate Office. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 108353331

Country: South Africa

Source: ONLINE TENDERS

01 jul
The U.S. Consulate General in Johannesburg hereby invites interested and qualified service providers for the following: Maintenance and repair of the service CAC and utility building facade at the US Consulate General Johannesburg. The proposed work includes painting, maintenance, and repairs of the SCAC & UTL, stucco plaster finished walls, but is not limited to, the following: 1. Facade Access: Mobile man-lifts from grade or scaffolding from grade; 2. Install temporary protection on the lower SCAC & UTL finishes, roof surfaces, doors/windows, and grounds at base of facades; 3. Inspect plaster damages, cracks, and paneled areas by mechanical sounding of the plaster to confirm attachment to the concrete substructure; 4. Inspect control/reveal joints, perimeter metals, and through-plaster penetration flashings for damages; 5. Remove loose, cracked, and damaged plaster. "V" cut cracks to sound material; 6. Remove by saw-cuts loose, damaged, corroded metal control/revel joints. Replace metal control/revel joints to match original alignment; 7. Clean/pressure wash plaster wall areas and allow to dry. Clean/pressure wash any lower windows, doors, and facade areas affected by work above; 8. Clean/Pressure wash exterior canopy fascia, soffit, interiors, and ceiling areas and allow to dry; 9. Perform repairs where the multi-layer plaster has been damaged and allow to fully cure. Perform a water-spray curing process; 10. Perform paint color mock-up areas before applying final primer and finish paint on plaster walls; 11. Remove and replace existing backer rod and sealant in stone joints, plaster joints, between stone and plaster, and between stone or plaster and window/door - Steel/aluminum frames. Include replacement of existing backer rod and sealant in joints of existing stone copings; 12. Paint miscellaneous facade related ferrous metals; 13. Prepare, prime, and finish paint exterior canopy ferrous fascia, soffit, trim, and ceiling areas. Please confirm the closing date and time as it was not published. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 106798842

Country: South Africa

Source: ONLINE TENDERS

27 jun
Extension of closing date: Eskom Holdings SOC Ltd (hereinafter “Eskom”) invites you to submit a tender for the following: Collection, dismantling, assessment, repair, rewind, overhaul, assembly, painting, testing and delivery of low voltage electrical motors as and when required at Hendrina Power Station for a period of 5 years. Scope of work: Assessment will include: • Stripping the motor; • Washing all parts; • Mechanical assessment; • Electrical assessment; • Assessment report. Rewind will include: • A burn out of windings in stator; • Core test; • Painting of core with rust protection paint; • Insulation kit for winding (class H); • Manufacture of coils copper wire; • Supply leads for windings; • Varnishing the stators with Isonel 31 – Isonel no longer used replaced by Fixotropic; • Baking the varnish at 180 degrees; • Cleaning the stator core before assembly. Overhaul will include: • 2 (two) new bearings; • Balancing of rotor; • Replace broken cooling fan if needed – to be on additional part; • Replace connector block if damaged or as been requested; • Replace connection box if damaged or as been requested; • Replace end shields if damaged or as been requested; • Assembly of motor; • Electrical and mechanical testing of the motor (no load); • Painting of motor; ? Delivery back to Employer’s site. Additional work: • Micro welding; • Shaft straightening; • Machining of new feet; • Taping and replacing of bolts; • Repairing of shaft extensions; • Skimming of rotor core; • Skimming of stator feet (all 2 poles); • Repair of stator core. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 106626347

Country: South Africa

Source: ONLINE TENDERS

05 apr

Number: 102331323

Country: South Africa

Source: ONLINE TENDERS