on metal doors - South Africa: tenders. rfq, rfp. Public and goverment procurement information and competitive bids. 2025

21 nov

China top manufacturer custom high quality steel pivot external security doors for house metal front... (EN)

Number: 114506548

Country: South Africa

Source: RFQ

18 sep

Metal Wire Bars Frame Pigeon Entrance Door Racing Pigeon Activities Doors Prevent Flying Pigeon Trap (EN)

Number: 110934182

Country: South Africa

Source: RFQ

11 sep

Quotations are hereby invited for the following: Supply and Installation of Canopies for the Volkswagen Transporter double cab long wheel base to the CSIR. Specifications: Two (2) metal canopy’s with roof rack is required for a Volkswagen Transporter double Cab long wheel base. One is required in the Western Cape (Stellenbosch) and one is required in Gauteng (Pretoria): • Powder coated metal frame; • Two lockable powder coated doors on each side, gas strud supported, no windows; • Glass window by cab; • Glass window by lockable powder coated back door, one way tinted. Smash and grab; • Roof rack for 120kg, Flat on top. Same size as canopy; • Supporting legs on all four corners to carry the weight of the canopy as well as the roof rack for 120kg. The side and back drop sides of the vehicle must still be able to be opened without removal of the canopy. Vehicle rear and drop sides must have latches or locks to prevent unauthorized entry through vehicle drop sides when canopy is closed. (EN)

Customer: ONLINE TENDERS

Number: 110698158

Country: South Africa

Source: ONLINE TENDERS

06 sep

Re-advertisement: Quotations are hereby invited for the following: Wheelchair ramp service on buses. Specifications: Wheelchair ramp service on 8 x buses as follows: (1). CA 435 458 - Air boosters of doors and rollers replaced. Middle step replaced the metal sheet. Bottom step remove plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (2). CA 335 836 - Air boosters of doors and rollers replace Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service Check hydraulic pipes and replace; (3). CA 423 499 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (4). CA 415 752 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (5). CA 940214 - Hydraulic pipe leak Replace handle rubbers. Check test motor and service; (6). CA 940839 - Hydraulic pipe leak Replace handle rubbers. Check test motor and service; (7). CA 366803 - Air boosters of doors and rollers replace. Middle step replaced metal sheet Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (8). CA43507 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (9). CA 438624 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace. (EN)

Customer: ONLINE TENDERS

Number: 110446120

Country: South Africa

Source: ONLINE TENDERS

23 aug

Re-advertisement: Extension of Closing Date: Quotations are hereby invited for the following: Purchase farming supplies. Specifications: - Feed bucket, medium, heavy duty, rubber 468 x 356 x 200 high (to use as foot dip basin); - Concrete mixing wheelbarrow (builders metal wheelbarrow); - Digital hygrometer, height: 170mm, width: 125mm, length: 50mm (116g) (temperature and humidity); - Digital electronic hanging scale, weighing up to 100kg; - Enamel paint for doors 5L (charcoal colour); - Paints, exterior, water based washable paint, 20L (white); - Sawdust, 25kg per bag; - Live chicken crate with lid plastic bird coop, vented, 74 x 53 x 31cm, black or green, volume: 90.4L. Delivery Address: OSCA Research Station. Please note that this quotation was published late. (EN)

Customer: ONLINE TENDERS

Number: 109675042

Country: South Africa

Source: ONLINE TENDERS

21 aug

Knock Down Horizontal 6&9 Doors Metal Clothes Hanging Wardrobe Steel Gym Locker (EN)

Number: 109529182

Country: South Africa

Source: RFQ

16 aug

merSETA hereby invites suitably qualified and experienced independent service providers to provide physical security services for a period of five (5) months in the Mpumalanga regional office. Scope of work: - Service to be rendered from 01 September – 31 January 2025; - Request for x1 Grade D security personnel; - Day shift with 10 hours for five (5) days a week, Monday to Friday; - Sign in all staff members and visitors visiting the office prior to allowing visitors entry to the office; - Mann the entry register; - Provide the merSETA with a Metal Detector that will assist the organisation to screen incoming individuals carrying weapons or undesirable weapons; - To protect the company and staff property; - Checking all assets taken from the office by staff members and ensure they are recorded; - Door Supervision, monitoring all visitors that are entering the office; - Monitor volatile situations, take the necessary actions to secure merSETA office; - Provide a report on all incidents on weekly basis; - Security must wear fully Security Company attire/uniform; - Security must be equipped with all equipment to execute his / her duties; - Grade D security would be preferred; - Ensure that all the windows and doors are closed at the end of the day and open a day before the employees comes; - Other Adhoc security duties. The merSETA regional office is based in Section 1 no 8 Corridor Crescent Route N4, Business Park Ben Fleur Ext 11, Witbank, Mpumalanga. (EN)

Customer: ONLINE TENDERS

Number: 109276718

Country: South Africa

Source: ONLINE TENDERS

12 aug

Suitable and qualified service providers are invited to quote for the supply and installation of 3 phase diesel generator 50kva. Specifications: Engine: 1. Industrial heavy duty diesel engine, water-cooled, 4 stroke and runs at 1500rpm, 2. Radiator to be a tropical type with pusher type cooling fan fitted with protection guards, 3. Engine to be equipped with 12 volt dc starting electrical system with starting motor, charging alternator, and high capacity battery with connecting cables, 4. Engine to be fitted with a set-mounted heavy duty long life industrial exhaust, 5. The engine filtration system should have replaceable elements for its air, fuel, and oil filtration, Alternator: 1. The alternator must incorporate a self-regulating sealed automatic voltage regulator, 2. Fitted with a fully sealed Automatic Voltage Regulator(AVR) that incorporates the following: - ±1% voltage regulator, - Under speed protection, - Short circuit current level adjustment, - Maximum excitation & loss of sensing protection, 3. The alternator must be run at 1500rpm and produce a constant three phase/single phase 400/231 volt (AC) voltage at 50hz at an efficiency output of least 0.8 p, The automatic transfer switching arrangements in case of the main power supply failure will mainly comprise the automatic mains failure control system for engine protection and lists as follows: 1. 3 x ammeters with ring type c.t, 2. High Engine Temperature (HET) shutdown protection with indicator, 3. 1 x frequency indicator, 4. Low Oil Pressure (LOP) shutdown with indicator, 5. 1 x voltage indicator, 6. Battery charge light with indicator, 7. 1 x hour run indicator, 8. Genset stop/ reset push buttons, 9. Genset selector switches (off/auto/run/test), 10. 1 x battery ammeter, 11. Set of motorized changeover (Electrically & Mechanically interlocked), 12. 1 x battery charger (automatic), 13. 3 pole air circuit breakers with overload & short circuit protection, 14. All panels are manufactured from 1.6mm cold rolled sheet metal, corrosion treated and powder coated to ensure a longer life span, Base frame and fuel tank: 1. Must be all steel fabricated rigid steel base incorporating a 15 hour capacity fuel tank, 2. Fuel filler/strainer/breather cap, drain plug & fuel supply and return lines and fittings must be supplied, 3. Suitably rated anti-vibration mountings must be fitted to absorb vibration, 4. Engine and alternator must directly be coupled by means of high quality flexible disc, Accessories: 1. 1x set of instruction manuals including all circuit diagrams, 2. Recommended service intervals and critical parts to be replaced each service intervals, Weather and sound proof canopy: 1. All steel fabricated from heavy gauge sheet metal, threaded and powder and coated for longer life span, 2. Unit must be designed for interior installation and also vermin proof, 3. Must have a large removable inlet and outlet louver which ensures sufficient cooling of generator, 4. The access doors for purposes of servicing and maintaining of the generator must be hinged, heavy-duty, and lockable, 5. All instrumentation must be made visible through a shatterproof glass hinged door fitted in front of the control panel, 6. The exhaust bellow must be fitted to engine exhaust manifold to absorb any vibration which may cause damage. (EN)

Customer: ONLINE TENDERS

Number: 109017242

Country: South Africa

Source: ONLINE TENDERS

12 jul

Re-advertisement: Quotations are hereby invited for the following: Wheelchair ramp service on buses. Specifications: Wheelchair ramp service on 8 x buses as follows: (1). CA 435 458 - Air boosters of doors and rollers replaced. Middle step replaced the metal sheet. Bottom step remove plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (2). CA 335 836 - Air boosters of doors and rollers replace Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service Check hydraulic pipes and replace; (3). CA 423 499 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (4). CA 415 752 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (5). CA 940214 - Hydraulic pipe leak Replace handle rubbers. Check test motor and service; (6). CA 940839 - Hydraulic pipe leak Replace handle rubbers. Check test motor and service; (7). CA 366803 - Air boosters of doors and rollers replace. Middle step replaced metal sheet Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (8). CA43507 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace; (9). CA 438624 - Air boosters of doors and rollers replace. Middle step replaced metal sheet. Bottom step remove the plate clean and replace. Test the motor and service. Check hydraulic pipes and replace. (EN)

Customer: ONLINE TENDERS

Number: 107333941

Country: South Africa

Source: ONLINE TENDERS

01 jul

The U.S. Consulate General in Johannesburg hereby invites interested and qualified service providers for the following: Maintenance and repair of the service CAC and utility building facade at the US Consulate General Johannesburg. The proposed work includes painting, maintenance, and repairs of the SCAC & UTL, stucco plaster finished walls, but is not limited to, the following: 1. Facade Access: Mobile man-lifts from grade or scaffolding from grade; 2. Install temporary protection on the lower SCAC & UTL finishes, roof surfaces, doors/windows, and grounds at base of facades; 3. Inspect plaster damages, cracks, and paneled areas by mechanical sounding of the plaster to confirm attachment to the concrete substructure; 4. Inspect control/reveal joints, perimeter metals, and through-plaster penetration flashings for damages; 5. Remove loose, cracked, and damaged plaster. "V" cut cracks to sound material; 6. Remove by saw-cuts loose, damaged, corroded metal control/revel joints. Replace metal control/revel joints to match original alignment; 7. Clean/pressure wash plaster wall areas and allow to dry. Clean/pressure wash any lower windows, doors, and facade areas affected by work above; 8. Clean/Pressure wash exterior canopy fascia, soffit, interiors, and ceiling areas and allow to dry; 9. Perform repairs where the multi-layer plaster has been damaged and allow to fully cure. Perform a water-spray curing process; 10. Perform paint color mock-up areas before applying final primer and finish paint on plaster walls; 11. Remove and replace existing backer rod and sealant in stone joints, plaster joints, between stone and plaster, and between stone or plaster and window/door - Steel/aluminum frames. Include replacement of existing backer rod and sealant in joints of existing stone copings; 12. Paint miscellaneous facade related ferrous metals; 13. Prepare, prime, and finish paint exterior canopy ferrous fascia, soffit, trim, and ceiling areas. Please confirm the closing date and time as it was not published. (EN)

Customer: ONLINE TENDERS

Number: 106798842

Country: South Africa

Source: ONLINE TENDERS

24 may

uMshwathi Municipality invites prospective supplier to submit quotation for service provider to do repairs and maintenance at Dalton Library Ward 07. Scope: • Fitting - vertical blinds; • Carpentry and joinery - doors • Metal work; • Concrete, formwork and reinforcement; • Flooring and clearing. Delivery address: Main Offices; Opposite Police Station; New Hanover; 3233. (EN)

Customer: ONLINE TENDERS

Number: 104990933

Country: South Africa

Source: ONLINE TENDERS

22 may

Tenders are hereby invited for the following: Refurbish checkers cabin crane 523. The contractor shall conduct the work as follows: 1. The contractor shall remove all the rust on the cabins, all corroded areas are to be de-rusted and repaired. After rust removal, the metal surfaces should be carefully blown clean; 2. Any repaired and/or replaced surfaced metal must be painted for corrosion protection as per TPT specifications. Paint work must be as per original colour; 3. The cabin doors shall be replaced with new doors that are lockable, sliding and have durable gliders. The contractor is to ensure that the door slides freely for correct operation; 4. The contractor shall replace all the broken cabin windows/glasses to original OEM specifications. New windows/glasses to be fitted and sealed appropriately; 5. The contractor shall the Checker"s cabins as per the original colour; 6. The contractor shall replace all roll-up blinds on the windows. Location of Service: DCT Pier 2. Please note that this quotation was published late. (EN)

Customer: ONLINE TENDERS

Number: 104846694

Country: South Africa

Source: ONLINE TENDERS

22 may

Tenders are hereby invited for the following: Refurbish checkers cabin crane 522. The contractor shall conduct the work as follows: 1. The contractor shall remove all the rust on the cabins, all corroded areas are to be de-rusted and repaired. After rust removal, the metal surfaces should be carefully blown clean; 2. Any repaired and/or replaced surfaced metal must be painted for corrosion protection as per TPT specifications. Paint work must be as per original colour; 3. The cabin doors shall be replaced with new doors that are lockable, sliding and have durable gliders. The contractor is to ensure that the door slides freely for correct operation; 4. The contractor shall replace all the broken cabin windows/glasses to original OEM specifications. New windows/glasses to be fitted and sealed appropriately; 5. The contractor shall the Checker"s cabins as per the original colour; 6. The contractor shall replace all roll-up blinds on the windows. Location of Service: DCT Pier 2. Please note that this quotation was published late. (EN)

Customer: ONLINE TENDERS

Number: 104846696

Country: South Africa

Source: ONLINE TENDERS

22 may

Tenders are hereby invited for the following: Refurbish checkers cabin crane 521. The contractor shall conduct the work as follows: 1. The contractor shall remove all the rust on the cabins, all corroded areas are to be de-rusted and repaired. After rust removal, the metal surfaces should be carefully blown clean; 2. Any repaired and/or replaced surfaced metal must be painted for corrosion protection as per TPT specifications. Paint work must be as per original colour; 3. The cabin doors shall be replaced with new doors that are lockable, sliding and have durable gliders. The contractor is to ensure that the door slides freely for correct operation; 4. The contractor shall replace all the broken cabin windows/glasses to original OEM specifications. New windows/glasses to be fitted and sealed appropriately; 5. The contractor shall the Checker"s cabins as per the original colour; 6. The contractor shall replace all roll-up blinds on the windows. Location of Service: DCT Pier 2. Please note that this quotation was published late. (EN)

Customer: ONLINE TENDERS

Number: 104846697

Country: South Africa

Source: ONLINE TENDERS

15 apr

Custom high quality steel pivot external security doors for house metal front entry exterior door (EN)

Number: 102841456

Country: South Africa

Source: RFQ

10 apr

Quotations are hereby invited for the following: Provision of Mantakraft panel doors repairs for Transnet SOC Ltd at the Port of Richards Bay. Specifications: 1. Supply and install 20 x panel door isolators at the E-house: • The isolator must come with metal shaft 282mm; • Pad lockable and din rail mounting. 2. The contractor must supply 80 (24V) LED indicator lamp: • Supply 80 x panel door lamp; • Supply 80 x panel door switch; • All lamps must clear white. 3. Supply and install 100 x heavy-duty panel hinges and locking mechanism: • Each panel hinges must have four mounting holes and it must turn at an angle of 1800. Locks must turn at an angle of 900; • All hinges must have same size 9.5 x 40 x 40mm (304 stainless steel); • Locks must be protected against water and dust according to IP65 of EN 60529; • The lock must take square key (6 x 6mm) and the locking element must be 45mm long. 4. Supply and install 400m of panel door rubber (IP65): • The contractor must install the sealing rubber in all electrical enclosure. The sealing rubber must fit on a plate thickness of 4mm; • Rubber type: Capping Rubber; • Material: Poly, EPDM, PVC. 5. Supply and install 200 x control switch and 15 x 220v enclosure heaters: • Button must be 22mm in diameter and must be IP65; • Button must operate with 12 to 24v. 6. Panel labelling: • Engrave aluminum plate for all labelling; • They are 100 plate for 80 x 30mm, 50 for 100 x 50mm and 200 for 50 x 20mm; • Labelling must be adhered on panel by means of heavy-duty glue and riveted. Location of Service: RBC DBT. Name of Institution: TPT. (EN)

Customer: ONLINE TENDERS

Number: 102604097

Country: South Africa

Source: ONLINE TENDERS

20 mar

Steel doors security exterior model metal door security galvanized steel door one and half door ... (EN)

Number: 101632249

Country: South Africa

Source: RFQ

18 feb

Grandsea Modern Villa Stainless Steel Metal Swing Double Doors For Houses Security Stainless Steel ... (EN)

Number: 99830898

Country: South Africa

Source: RFQ

14 feb

Lockable aluminum ceiling inspection access panels hatch metal ceiling access doors (EN)

Number: 99611725

Country: South Africa

Source: RFQ

18 jan

America standard UL approve steel fire-proof door Best Price Emergency exit Metal Fire Rated Doors (EN)

Number: 98023594

Country: South Africa

Source: RFQ

on metal doors: South Africa tenders, rfq bids, opportunities and procurement 2025