on electrical goods: South Africa tenders, rfq bids, opportunities and procurement 2024


Total: 59
18 oct
Re-advertisement: Tenders/Quotations are hereby invited for repairs of the grave site of Steve Biko in King Williams Town, Ginsburg cemetery, Eastern Cape. Scope of services: 1. The service provider must carefully remove the paving around the area where the pillars are installed and preserve the paving bricks for reinstallation after the procured pillars have been reinstalled, 2. The maximum area whose paving installation must be removed is 8 square metres, 3. The service provider must carefully dismantle, remove and dispose of the three pillars currently installed on the gravesite of Steve Biko. Great care must be exercised so as not to damage the rest of the grave, 4. The service provider must source three Zimbabwean granite polished pillars for installation. Two of the pillars must be vertically erected while the third must be horizontally mounted on top of the two pillars, 5. The two vertical pillars must be a total of 2000mm. Pillars must be dug to a depth of 444mm and held by a footing of 500mm x 500mm high strength concrete mixture, The height of the pillars after being installed must be 1556mm, excluding the horizontal pillar, 6. The breadth and width of the pillars must be 270mm x 200mm, 7. Base trimmings at the foot of each of the two vertical pillars must be 340mm x 280mm x 100mm high, 8. Both vertical pillars must be 110mm away from the grave on each side, 9. A horizontal pillar measuring 1430mm long, 320mm x 280mm must be sourced and mounted and fastened on top of the vertical pillars, 10. The Horizontal Pillar must be engraved with the name of Steve Biko in the same font size and type as is currently on the site, 11. This horizontal pillar must be reinforced by two 12mm reinforcement steel rods on each end to hold it to the vertical pillars. A high strength stone adhesive must also be used, 12. The service provider must procure two hands carved in marble for installation at the back of the grave, 13. The hands must be a total of 200mm high, 14. The carved hands must be mounted on a 30mm thick base of polished Zimbabwean granite measuring 465mm x 240mm, 15. The service provider is to consider all costs related to this setting up on site and setting up of works and should be included in the Final Offer, 16. A retention fee of 10% will be withheld on interim payment certificates. The retention is payable after six (6) months of project completion, 17. The service provider must include a 10% contingency amount on the pricing. 18. The service provider must make alternative arrangements for electrical connection as no electrical power is available at the cemetery, 19. The service provider must clean up the site and remove all rubble and all construction associated waste generated during construction, 20. The service provider is responsible for the safekeeping of his goods and appoint at his/her own costs suitable and qualified security to the site/s during the period of contract (from date of Site Handover until Practical Completion), 21. The service provider is to consider all costs related to this setting up on site and setting up of works and should be included in the Final Offer, 22. The service provider is expected to provide a breakdown of the programme of works with the submission of the quotation, 23. The project completion is estimated at 40 days from the date of site handover. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 112469237

Country: South Africa

Source: ONLINE TENDERS

22 aug
Quotations are hereby invited for potential service providers to submit a detailed proposal to AIDC for the installation, and configuration of CAD software licenses for 36 months. IPD Scope: Autodesk AutoCAD (Product design and Manufacturing) 2025 with subscription and 3-years license for 2 X users to: • Precisely design 2D drawing, mechanical designs and floor layouts; • 3D modelling features that let you make intricate mechanical designs in three dimensions; • Dimensioning and Annotation to express crucial details by adding dimensions and annotations to the drawings; • Customization for programming languages such as AutoLISP and its ability to construct custom tools and add-ons to customize the software to a great extent; • Compatibility with many different file formats, which facilitates sharing and teamwork when working on projects; • Precision Tools for precise design work, which is essential for mechanical and floor plans alike. FMM Scope: Autodesk AutoCAD 2025 with subscription and 3-years license for 2 X users to: • Design and annotate 2D geometry and 3D models with solids, surfaces, and mesh objects; • Automate tasks such as comparing drawings, counting objects, adding blocks, creating schedules, and specialized toolset; • Create a customized workspace to maximize productivity with add-on apps and APIs. Features: • Seven specialized toolsets for Architecture, Mechanical design, 3D mapping, Plant 3D, Electrical, MEP, Raster Design give you industry-specific capabilities to speed up your work; • 3D modelling and visualization; • Create and edit 3D models with solids, surfaces, & mesh objects; • Compatible for 3D printing; • Customization of your software, including built-in programming capabilities with add-on apps and APIs; • Extend Auto LISP programs with third-party automation libraries and utilize specialized editors to write and debug programs; • Extract object data to tables; • Create renderings with lighting, materials, & visual styles; • Automate counting objects and block; • Access libraries of 750,000+ symbols, parts, & detail components; • Integrate coordinated BIM models. lace where goods, works or services are required: Automotive Supplier Park, 30 Helium Street - Rosslyn - Pretoria - 0200. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 109590941

Country: South Africa

Source: ONLINE TENDERS

13 aug
Quotations are hereby invited for the following: Supply, install and then commission a dedicated clean wall plug circuit for the main pharmacy medicine dispensing area at Catherine Booth Hospital. Specifications: - Supply materials, install and then commission a dedicated electrical plug circuit in the hospital pharmacy dispensing area. - Install double wall plugs in the pharmacy section at each medicine dispensing windows. - The complete circuit shall be done in the main OPD dispensing side and then also at the MDR dispensing windows. - Double plugs shall be red in colour to identify a clean dedicated circuit. - All electrical shall be laid in PVC piping and saddled onto the walls, in such way not to disrupt the operations of the dispensing areas. - Electrical supply shall be connected at the main incoming distribution board at the administration side of the building. - The dedicated circuit shall be clearly identified on the distribution board legend card and on the Board inner cover. - All electrical work shall be done the SANS 0142 electrical installation regulations. - An electrical COC shall be issued on the installation and the main distribution board. - On completion the complete installation shall be tested on full load to ensure loads are carried to the requested time. - Clean the work area daily as the pharmacy is a clean area. Institution Name: Catherine Booth Hospital. Province: KwaZulu-Natal. Department of entity: Department of Health. Division or section: Supply Chain Management. Place where goods/service is required: Catherine Booth Hospital. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 109084516

Country: South Africa

Source: ONLINE TENDERS

10 feb
Re-advertisement: Quotations are hereby invited for the following: Building repairs and maintenance services for PPECB Plattekloof Head Office for a period of three years, with an option to extend for a further 24 months. The scope of services for general building repairs and maintenance listed below includes, but is not limited to the following: i. Structural maintenance (building fabric, roof); ii. Waterproofing; iii. Painting (inside and outside); iv. Boundary maintenance (there may be instances where we may have to do work on council property/across boundary lines); v. Plumbing; vi. Carpentry/shopfitting; vii. Keys/replacements (doors, cupboards, credenzas, etc); viii. Window cleaning – working at heights (rate per windowpane); ix. Landscaping and garden services; x. General building repairs and maintenance; xi. Door and window repairs; xii. Glazing/profiling; xiii. Gate automation – repairs, maintenance and replacement to electronic gates, motors, battery replacement; xiv. Flooring (tiling, carpets, leaks etc.) rate per square meter; xv. Air-conditioning maintenance, repairs and servicing (40 x aircon units) under ceilings cassette (6), hideaways (1), midwalls splits (33); two times minor service and one-time major servicing; xvi. Electrical services, included but not limited to the following: a) Electrical set up and re-wiring; b) Electrical panel installation, upgrading and replacement; c) Surge protection; d) Outlet installation and repairs; e) All lighting requirements – fixture installations, replacement, and repair; f) Building electrical repairs and maintenance; g) Electrical Compliance Certificates (COC) – certificate of compliance; h) Ad-hoc repairs; i) Emergency call-out fees; j) After-hours call-out fees. Place where goods, works or services are required: 45 Silwerboom Avenue - Plattekloof 2 - Cape Town - 7500. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 99413436

Country: South Africa

Source: ONLINE TENDERS

22 nov
Quotations are hereby invited for the following: People’s Public Computer Lab (Steinkopf Primary School) – Refurbishment. Specifications: Room 1: Building: • Painting: Ceiling 8.461/6.370 (White); • Interior Wall Painting: 8.461/6.370 Assorted Colors (Turquoise, Orange & Grey); • Vinyl Composition Tile: 8.461/6.370 (MF2516 Old Steel); • Window blinds 1: 0.993/1.8; • Window blinds 2: 0.991/1.8; • Window blinds 3: 0.983/1.8; • Window blinds 4: 0.989/1.8; • Window blinds 5: 1.274/930; • Window blinds 6: 1.274/930; • Supply and installation of Fire Extinguishers x 2 (4.5kg DCP); • Supply and installation of signage boards (Arrow x 1, Exit x 1 and Fire extinguish x 1). Electrical: • Supply and installation: Air-conditioned BTU 12000 x 2 (Samsung/Phillips/LG/EIC); • Security cage: Aircon fan x 2; • Supply and installation: 6 x Radiant LED Fluorescent Ceiling Lights 600 x 1200mm; • Installation and electrifying of: VEGA Projector Screen x 1; • Installation and electrifying: Projector x 1; • Installation: Projector Cage Ceiling Mount x 1; • Supply and installation: Trunking System; • Supply and installation: Double Plugs x 30 (On trunking system); • Upgrade DB Box D5 and Electrifying room (Single Phase); • COC compliance certificate to be provided. Carpentry: • Supply and installation: Floor Skirting 8.461/6.370; • Supply and installation: Tables x 10 (2.8/70.74) Woodland Fusion Tops: Texture; • Supply and installation: Standard Wooden Door: 2.119/0.951; • Sanding and Varnish Wooden Floor 8.461/6.370. Security: • Supply and installation: Burglar windows Reinforcement x 6; • Window 1: 0.993/1.8; • Window 2: 0.991/1.8; • Window 3: 0.983/1.8; • Window 4: 0.989/1.8; • Window 5: 1.274/930; • Window 6: 1.274/930; • Supply and installation: Burglar Door 2.119/0.951; • Window above door: Burglar 0.853/640; • Supply and installation: Burglar Door; • PC cable lock x 30; • Cable zip with zipper clip 2m x 30; • Supply and installation: Union 3 lever door lock x 1. Room 2: Wooden floor sanding and varnishing: 6.396/7.278. Room 3: Wooden floor sanding and varnishing: 6.384/7.219. Purpose for goods required: Computer Lab Refurbishment. Please confirm the closing time. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 94731543

Country: South Africa

Source: ONLINE TENDERS