engineering structures: tenders, rfq bids, opportunities and procurement 2024. Page № 2


Total: 102
26 dec

Number: 96895707

Country: France

Source: TED

23 dec
Re-advertisement: Quotations are hereby invited for the following: Supply of services to refurbish the PE Manganese Terminal for Transnet SOC Ltd operating as Transnet Port Terminals, as a once off supply. Scope of work: During the scope finalization of the refurbishment the following were taking into consideration: • Installation of technological improvements; • Carry out structural repairs; • Implement large scale corrosion protection; • Renew the integrity of electrical components of the asset; • Refurbish components or systems that are normally only exposed to maintenance services; • Upgrade components that have become obsolete; and • Replace components where interchangeability with replacement parts is not possible without equipment outage. The scope of the refurbishment was categorized into three (3) engineering disciplines, namely: • Mechanical - includes components or systems such as the open gear systems, gearboxes, hydraulic systems, and rotating and moving parts; • Structural - includes wear liners, supporting structures (if required) and areas of possible structural damage (cracking deformation wear). Additionally, includes maintenance detection; • Electrical, Control and Instrumentation (EC&I) - includes panels and drives that is approaching the end of their useful life, or has become obsolete or, where newer technologies can be incorporated. Terminal Electrical Compliance may be required to be complete. The scope of work for the refurbishment can be summarized as follows and the works that the Principal Contractor is to perform involve: Site establishment: Provision, transportation, off-loading and placement of all temporary offices, equipment and all other infrastructure required for execution of the works. Timeous finalizing of all training, medicals, permits and other documentation required, in order to commence with the execution works. Execution of SOW activities: Execution of all SOW activities planned for the refurbishment. Management & resources: Site Supervision, SHEQ Management, Site labour to work 24/7 (during planned Maintenance windows) within labour laws Compliance with the Department of Labour (DoL) with an approved mandate for extended working hours (if required), PPE, security-requirements, site equipment, cranage, vehicles, general tools, jacking tools/trestles, scaffolding, lighting and others. Commissioning: After Pre, Cold, and Hot Commissioning, all works is handed over to the BOT in “Safe for Operation” mode. Project close out: Project close out to be formally documented to cover all aspects of safety, training, as-built/red-line drawings, user manuals and updated maintenance procedures. All close out documentation to be handed over to the TPT Project Manager in hard copy format, as well as in electronic format. Site de-establishment: Removal from site of all temporary offices and infrastructure, equipment, tools etc, belonging to the Principal Contractor. Clear the site and hand back to the Employer. Please confirm the closing date. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 96752283

Country: South Africa

Source: ONLINE TENDERS

20 dec

Number: 96596396

Country: France

Source: TED

11 dec
Tenders are hereby invited for the following: Repair wiggins concrete structures (pulsators & filters) using wall thickening jacketing method & Sika methodology. Scope: Concrete Repair Proposal: a) Visually inspect and hammer test the entire concrete surface to identify and mark out defected concrete spalling; b) Cut a 10mm slot the defected concrete spalling and break out concrete to expose all corroded rebar, break 20-25mm behind corroded rebar; c) Where necessary replace rebar as a rule of thumb, replace rebar where 10% of cross section has been lost. Guidance must be given from structural engineering; d) Remove all corrosion from rebar mechanically by means of grit blasting; e) We propose two repair systems: Hand pack repair method using Sika MonoTop 1010 anti-corrosive coating and bonding agent and Sika MonoTop 412NFG repair mortar that can be hand applied and wet sprayed. Shutter and pour method using SikaTop Armatec; f) EpoCem anti-corrosive coating and bonding agent and Sikacrete 214 structural micro concrete; g) Cracks to sealed with Sikadur 31DW and Sikadur 52ZA low viscosity epoxy resin; h) Reseal expansion joints using Sika Primer 3N and Sikaflex PRO3i-cure; i) Apply Sika Ferrogard 903 Plus corrosion inhibitor in 2-3 coats depending porosity of the concrete surface at a total consumption of 0.5Lt/m²; j) Apply Sikalastic 152 polymer protective coating resistant against chlorides and carbonation ingress, the Sikalastic 152 must be applied at 2mm thick. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 96013353

Country: South Africa

Source: ONLINE TENDERS

05 dec
Technical inspection services of engineering structures (EN FR) add to Favorites
Contract value: 823 602 (USD)
Price original: 840 000 (EUR)

Customer: departement de la sarthe
Source: Département de la Sarthe

Number: 95603860

Country: France

Source: TED

01 dec
Quotations are hereby invited for the provision of professional architectural, engineering, quantity surveying, health and safety services for the expansion of the BIDVest business Lounge, General Departure Area and refurbishment of departure area at King Phalo airport in East London. Scope of Work: King Phalo airport management would like to expand one of the business lounges by increasing its floor space. The airport management would also want to expand the general departure area by adding more floor space and provide a face lift to the departure area. The architectural and engineering consultants will be required provide their service to enable the works to be completed successfully. The team will consist of the following: - Architect who will be responsible for the contract administration during construction; - Electrical Engineer (Professional Engineer/Technologist) who will be responsible all electrical reticulation requirement in the project; - Mechanical Engineer (Professional Engineer/Technologist) who will be responsible for all heating, ventilation and air-conditioning requirements in the project; - Civil Engineering (Professional Engineer/Technologist) who will be responsible for all load bearing of structures and wet services requirements in the project; - Health and Safety Professional who will be responsible for all health and safety requirements in the project; - Quantity surveyor professional who will be responsible for all cost related requirements before, during, construction and at close out of the project. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 95380796

Country: South Africa

Source: ONLINE TENDERS

10 nov
Technical inspection services of engineering structures (EN FR) add to Favorites
Customer: commune de villeneuve la garenne
Source: Commune de villeneuve la garenne

Number: 93988844

Country: France

Source: TED

09 nov
Proposals are hereby invited for the following: Appointment of service providers for hydrological studies for the three clusters in the Welisizwe Rural Bridges Programme: • Cluster 1: KwaZulu Natal (17) and Eastern Cape (17); • Cluster 2: Free State (14) and North West (14); • Cluster 3: Limpopo (17) and Mpumalanga (17). The objective of the RFP is to source for a service provider who will provide technical engineering advise to the Welisizwe Bridge Programme. The service provider will conduct hydrological studies that will guide the bridge designers to provide best design scenario providing safe and cost-effective bridges for the programme. The design of gabion erosion protection works is undertaken by the Department of Defence whilst the maximum lengths of the modular bridge structures will be determined by a modular bridge supplier. The key requirements for the service provider are the following: i. Technical strength – registered hydrology professional engineers to approve the designs; ii. Professional Indemnity – the service provider must ensure that the professionally registered engineer is indemnified against liability for all work undertaken; iii. Good communication skills – the programme has stakeholders such as DPWI, NDOT, PICC TTT, SANDF and Provincial Departments of Roads and Transport that will need to be consulted. The service provider is required to ensure that services rendered will be carried out by resources having the requisite expertise in hydrological engineering, particular experience in hydrology of bridges, major drainage structures or dams is preferred. (EN) add to Favorites
Customer: ONLINE TENDERS

Number: 93930003

Country: South Africa

Source: ONLINE TENDERS

31 oct
Technical inspection services of engineering structures (EN FR) add to Favorites
Contract value: 627 506 (USD)
Price original: 640 000 (EUR)

Customer: communauté Urbaine d"arras
Source: Communauté urbaine d"Arras

Number: 93400392

Country: France

Source: TED

20 oct
Technical inspection services of engineering structures (EN FR) add to Favorites
Customer: commune de villeneuve la garenne
Source: Commune de villeneuve la garenne

Number: 92848061

Country: France

Source: TED

20 oct
Technical inspection services of engineering structures (EN IT) add to Favorites
Contract value: 1 235 403 (USD)
Price original: 1 260 000 (EUR)

Customer: COMUNE DELL"AQUILA
Source: Comune dell"Aquila

Number: 92848797

Country: Italy

Source: TED

20 oct

Number: 92851210

Country: France

Source: TED

13 oct
Technical inspection services of engineering structures (EN FR) add to Favorites
Customer: conseil Régional de la Réunion
Source: Conseil régional de la Réunion

Number: 92469454

Country: France

Source: TED

29 sep
Technical inspection services of engineering structures (EN FR) add to Favorites
Customer: conseil Régional de la Réunion
Source: Conseil régional de la Réunion

Number: 91396685

Country: France

Source: TED

27 sep
Technical inspection services of engineering structures (EN FR) add to Favorites
Contract value: 287 421 (USD)
Price original: 293 144 (EUR)

Customer: collectivité européenne d"alsace
Source: Collectivité européenne d"Alsace

Number: 91327830

Country: France

Source: TED

27 sep
Technical inspection services of engineering structures (EN FR) add to Favorites
Contract value: 229 283 (USD)
Price original: 233 848 (EUR)

Customer: collectivité européenne d"alsace
Source: Collectivité européenne d"Alsace

Number: 91329530

Country: France

Source: TED

26 sep

Number: 91293893

Country: France

Source: TED