Re-Advertisement: Quotations are hereby invited for the following: Supply and deliver kiosk: Specifications: - Meter Kiosk Electrical 9 Way 3CR12 Steel, Qty: 10, - Meter Kiosk Electrical 9 Way 3CR12 Steel, Qty: 10. Material: - All material used in the manufacturing process shall be new and of the best quality, - The material for the kiosk shall be 3CR12 steel with a wall thickness of not less than 1,6mm, - The internal backing board frame shall be hot dip galvanised steel to SANS 121 or 3CR12 steel, - All bolts, nuts and washers shall be stainless steel. No electro-galvanised or cadmium plated steel will be accepted, - All hinges, door-locking devices and other fittings shall be stainless steel. Die-cast aluminium door components are unacceptable, Cleaning and painting: - The 3CR12 steel surface shall be thoroughly cleaned of all dirt, grease, mill scale, moisture and other contaminants to give it a dry, bright metallic surface. Immediately thereafter, it shall be treated in accordance with the manufacturer’s usual practice for a superior quality product. The equipment shall be provided with a suitable undercoat, sprayed prior to being fully painted and shall not require further painting after installation, - Complete painting specifications, as proposed by the manufacturer for the individual items of equipment, shall be stated. - The exposed surfaces of the material shall be an acid resistant, ultra violet stabilised colour giving a smooth and even colour finish. The final colour shall be C37 - light stone to SABS 1091, Layout and construction: The kiosk shall comprise of the following: - A 3CR12 kiosk component complete with a front and a back door, - A 3Cr12 steel base that shall be welded to and form a unit with the kiosks component. The kiosk component and base can be manufactured as one unit, - A hot dip galvanised or stainless steel backing board frame; A 6mm tempered Masonite backboard, sealed with a suitable undercoat and painted with enamel paint to an orange colour finish, - A 25mm x 5mm tin coated copper earth bar fitted to the backing board frame, - A 40mm x 4mm tin coated copper neutral earth bar fitted to but insulated from the backing board frame, - A 31,50mm x 3,15mm tin coated copper bus bar for each of the live phases fitted to but insulated from the backing board frame. The kiosk shall be so constructed and sealed to prevent the ingress of water and vermin. The doors of the kiosk shall be restricted from opening by means of a non-ferrous unit beyond a position that may damage the door hinges. At least ten evenly spaced 8,50mm diameter holes and four 12,20mm diameter holes shall be drilled into the neutral, earth and live bus bars for the connection of conductors. Labels: - A danger notice sign, which comply with the requirements of the Occupational Health and safety Act, is to be embossed or fitted to the doors, - One manufacturer’s nameplate, not larger than 50mm x 100mm may be fitted to the lower let side of the kiosk. (Tender №108736745)